Download for T2600G-18TS V2

Please choose hardware version:

>How to find the hardware version on a TP-Link device

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.

Product Overview

T2600G-18TS(UN)_V2_Datasheet

Manual

JetStream 16-Port Gigabit L2 Managed Switch with 2 SFP Slots
T2600G-18TS

MIBs Files

T2600G-18TS(UN)_V2_MIB_20180710		Download
Published Date: 2019-05-13	Language: English	File Size: 206.12 KB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Client

TP-LINK_802.1X_Client_Software		Download
Published Date: 2017-09-05	Language: English	File Size: 5.5MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver		Download
Published Date: 2019-03-13	Language: English	File Size: 3.10 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10
Notes: For TP-LINK switches with USB Console port

FAQs

How to access TP-Link JetStream Managed Switch via the Console port 06-29-2022309404
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022282676
How to configure the DHCP Relay in TP-Link Switch 06-27-2022231490
How to configure DHCP Auto Install to let Switch get configuration file and image file from TFTP server 06-27-202259085
How to configure the default gateway of the smart and L2 managed switches using the new GUI 06-27-2022130952
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-202297315
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202277682
How to manage the switch with Mac via Micro USB cable 06-24-202237305
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202143912
How to enter the BootUtil Menu to factory reset the switch with the console cable? 09-06-202192445
Troubleshooting Instruction of TP-Link switch’s SFP port 07-20-202169807
The difference between the Voice VLAN feature and Auto VOIP feature 08-12-202065762
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018116667
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201658529

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
How to find the hardware version on a TP-Link device
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T2600G-18TS(UN)_V2_20200304		Download
Published Date: 2020-10-21	Language: English	File Size: 9.26 MB
New Features/Enhancements: 1. Add the feature that needs to change the password when login for the first time. 2. Add the feature that can choose not to change the IP address when resetting the switch. 3. Add "service reset-disable" for removing reset option from Bootutil. 4. Add built-in Telnet client which allows the switch can telnet other devices. 5. Allow disabling HTTP and HTTPS for access types at the same time. 6. Optimize the password character set to support more special characters. 7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled. 8. Optimized the CLI display of MVR configurations. 9. Support to display MVR members of inactive and active groups. 10. Support to view/clear mac-address table on port/VLAN. 11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP. Notes: 1. For T2600G-18TS(UN) V2.0 2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading. 3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T2600G-18TS(UN)_V2_190516		Download
Published Date: 2019-07-17	Language: English	File Size: 9.06 MB
Modifications and Bug Fixes: 1. Enhanced the MVR function. 2. Support TLS 1.2. 3. Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up interface and PPPoE IP insertion is IP mode. 4. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time. 5. Fix the bug that cannot set up auto mode for fiber ports which in portchannel. 6. Fix the bug that access control entries will not take effect when two or more entries are added for port binding. Notes: 1. For T2600G-18TS(UN) V2.0. 2. If your device's Hardware Version is 1.0, after upgrading to this firmware, the old configuration will be lost.

T2600G-18TS(UN)_V2_180710		Download
Published Date: 2018-08-01	Language: English	File Size: 7.82 MB
Modifications and Bug Fixes: First firmware released. Notes: For T2600G-18TS(UN) V2.0

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

GPL Code

T2600G-18TS_V2_GPL

Emulators

Firmware Version	Working Mode	Language
180919	-	English	Browse

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.

Q&A

Feature Configuration Guide

From Hong Kong?

Get products, events and services for your region.

English繁體中文

GO Other Option